SeaKeeper have announced they are debuting the Seakeeper 1 at the Miami International Boat Show on the 13th of February, which will eliminate up to 95% of boat roll for boats 7m upwards. The new Seakeeper 1 features a flush mount design for easier installation, runs exclusively on 12V DC power, and can be installed virtually anywhere on board.
It’s small
The Sk1 weighs only 165kg and comes in at 582cm long x 598cm wide x 398cm high.
New Dash Display
Control your Seakeeper with the push of a button on our new user-friendly dash display. Not only is the display simple to use, but it integrates into your existing dash units for optimal performance.
15 Minutes
Only 15 minutes from spool up to stabilisation!
DC Power
The same power draw as your cranked up stereo
Seatrials
To view seatrial reports check out the SeaKeeper’s webpage here
Specs
| Rated Speed | 9,750 RPM |
| Angular Momentum at Rated RPM | 1,000 N-M-S |
| Max Anti-Rolling Torque at Rated RPM | 2,620 N-M |
| Spool-up Time to Rated RPM | 30 minutes (9,750 RPM) |
| Spool-up Time to Stabilization | 15 minutes (7,310 RPM) |
| Spool-up Power | |
| AC Input | N/A |
| DC Input | 600 Watts Max |
| Operating Power | |
| AC Input (sea state dependent) | N/A |
| DC Input | 300 – 600 Watts (Sea State Dependent) |
| AC Input Voltage (Single Phase) | N/A |
| DC Input Voltage | 12 VDC @ 55 Amps |
| Weight | 365 lbs (165 kg) Approximately |
| Envelope Dimensions | 22.9 L x 23.6 W x 15.7 H (Inches) 0.582 L x 0.598 W x 0.398 H (meters) |